bottom extrusion needling machine

The bottom extrusion needling test machine simulates that the bottom battery is squeezed and punctured by hard objects in the actual driving of the vehicle. It is mainly used for the bottom ball test of power battery pack or system to assess and evaluate the safety of battery products in the bottom ball test environment.

Registration with the Certification and Accreditation Administration
Having legal effect
International credibility

Speed up certificate issuance by 35%
Declaration on the same day
Real time progress tracking

15 testing points
1v1 full jury
5-star service experience

153-6682-2992

detail

The bottom of the

extrusion needle test machine is used for nickel-hydrogen batteries, lithium batteries, super capacitor monomer, modules, battery packs and other types of automotive power battery puncture test, used to simulate the battery in high and low temperature environment under the action of strong external force under the battery will explode, fire and other phenomena, to assess its safety is good or not.

the

equipment parameters

meet the standards: GB/T 31467.3-2015, GB/T 31485-2015, GB/T 8897.4-2002(IEC 60086-4:2000), UL1642, SN/T 1414.1-2004, SN/T 1414.3-2004, IEC62133-2012, UN 38.3, GB 31241-201

extrusion needling force value range: 20KN

test force measurement range: 5%-100 FS

extrusion speed: 0.01~300 mm/min

needling speed: 0.01~500 mm/min

extrusion needle stroke: 0~500mm

can be done through the software delay constant voltage function

can record voltage and temperature